YT Channel Video Videos For 26th of August, 2019

Blaze Supply is proud to present “BABEL” Inspired by the legendary Tower of Babel story. With JP Dantas, Jhony Melhado, JP Villa, Matisse Banc, Oli Weismantel, Nabil Slimani, Leo Bodelazzi, Diego Stephan, Sandro Bertolucci, Nicolau Trimano, Anto Forot .<br />Babel was filmed through Brazil, France, Germany, Switzerland, Spain, Italy, Portugal, and the United States.<br />Enjoy “BABEL”<br /><br />Directed and Edited by: Bruno Dox<br />Filmed by: Bruno Dox, Rafael Galvão, Rodrigo Andrade<br /><br />Visit our site www.blazesupply.eu

Blaze Supply - BABEL

26th August, 2019

Blaze Supply is proud to present “BABEL” Inspired by the legendary Tower of Babel story. With JP Dantas, Jhony Melhado, JP Villa, Matisse Banc, Oli Weismantel, Nabil Slimani, Leo Bodelazzi, Diego Stephan, Sandro Bertolucci, Nicolau Trimano, Anto Forot .Babel was filmed through Brazil, France, Germany, Switzerland, Spain, Italy, Portugal, and ...

From the duo that took home the 2019 X Games Real BMX GOLD, comes Jordan Hango's full part in Andrew Schubert's Canadian creation, Fictional Finalism. Like anything Hango puts out, this does not disappoint.<br /><br />Full Video Here:<br />https://www.youtube.com/watch?v=G6EWw4B5jzM&t=1s<br /><br />Song: "Blinder by the Hour," by The Triffids<br />Filmed and Edited by: Andrew Schubert

Jordan Hango in Fictional Finalism

26th August, 2019

From the duo that took home the 2019 X Games Real BMX GOLD, comes Jordan Hango's full part in Andrew Schubert's Canadian creation, Fictional Finalism. Like anything Hango puts out, this does not disappoint.Full Video Here:https://www.youtube.com/watch?v=G6EWw4B5jzM&t=1sSong: "Blinder by the Hour," by The TriffidsFilmed and Edited by: Andrew Schubert ...

Memory Screen: Anthony Van Engelen

26th August, 2019

Subscribe to our YouTube channel here: together by Jan Maarten Sneep. ...

Little Ripper Freaks Out Meeting Jamie Foy at Macon Demo

26th August, 2019

Subscribe to the Next Generation Channel:🏁 🏁Demo in Macon, GA with Erick Winkowski, Jamie Foy, Clive Dixon, Axel Cruysberghs, Pedro Delfino, Alexis Ramirez, and Zachary KovacsFilmer: Cory Williams - More about Bronson RAW Bearings: up with the #FastestBearings on Social:🏁 Instagram: https://instagram.com/bronsonspeedco/🏁 Twitter: https://twitter.com/bronsonspeedco🏁 Facebook: us ...

LA residents Jonathan Hernandez and Juan Moreno, test out the NEW éS SYMBOL reissue shoe as well as check out the NEW éS Apparel. <br /><br />Filming by Spanish Mike and Film/Edited by Crazy Chris. <br /><br />Check www.eSskateboarding.com

Introducing the NEW éS SYMBOL !!

26th August, 2019

LA residents Jonathan Hernandez and Juan Moreno, test out the NEW éS SYMBOL reissue shoe as well as check out the NEW éS Apparel. Filming by Spanish Mike and Film/Edited by Crazy Chris. Check www.eSskateboarding.com ...

For this episode I flew out to Bristol for the Nass Festival and stayed to film with the United crew for an upcoming Mixtape!<br /><br />Shit obviously got loose so sit back and peep the vibes!<br /><br />Para este episodio viajé a Inglaterra para el famoso campeonato/festival llamado Nass y luego quedarme a grabar con los chicos de United para un nuevo Mixtape.<br /><br />Estaba claro que se iba a liar así que ponte cómod@ y distruta la movida!

#DIRTYTRYPS // NASS FESTIVAL & BRISTOL TRIP

26th August, 2019

For this episode I flew out to Bristol for the Nass Festival and stayed to film with the United crew for an upcoming Mixtape!Shit obviously got loose so sit back and peep the vibes!Para este episodio viajé a Inglaterra para el famoso campeonato/festival llamado Nass y luego quedarme a grabar ...

20 YEARS OF 41-THERMAL:<br />http://odysseybmx.com/41thermal<br /><br />As part of our mission to make the best BMX forks possible, we continue to refine the 41-Thermal® process at all stages of manufacturing. Each step in the process is held under strict scrutiny, and we continue to examine the strength and fatigue testing methods used to evaluate our designs.<br /><br />STAMPY TEST GOES ABOVE AND BEYOND THE INDUSTRY STANDARD:<br />- Much higher load than industry standard EN tests<br />- Load is applied in the correct direction<br />- Proper mounting rig to replicate real world use<br />- Test doesn’t stop until the fork fails<br /><br />In the previous round of Stampy fork tests we blew the industry standard EN tests for bicycle forks out of the water, and yet we still couldn’t break our own fork. In fact, we had to give up after running the fork for 2,000,000 cycles and with the machine operating at its ultimate limit.<br /><br />So, in order to push the tests and our forks even harder we created an updated rig design that would let us supply much more force than the last time around. With this test we doubled up the cylinders that are applying the load and ramped the force up by 25%, going from 4000 Newtons to 5000 Newtons. That’s just over half a ton! (1124 lbf per cycle). Even so, at half a million cycles we started to wonder how long our forks were going to last, and since our competitor’s forks had already been taken to failure, we decided to ramp up the load on our forks to 6000 Newtons (1349 lbf), 50% higher than the previous tests, and after over 650,000 cycles, we were finally able to break them.<br /><br />It is important to note that the 41-Thermal forks not only outperformed every other model that we tested by a huge margin, but that they did so while being lighter than most of the other forks too. This is direct evidence that proper design, engineering and manufacturing are much more important factors than simply always making the part heavier in hopes of making it stronger.<br /><br />UNMATCHED AND LEGENDARY LIFETIME WARRANTY:<br />- Best in class replacement program<br />- Warranty against bending, cracking, and breaking<br />- No fine print to limit coverage to basic manufacturing defects<br /><br />When you see how hard we push to make the best forks; to make them better and better every chance we get, it is easy to understand why our legendary lifetime warranty against bending and breaking is still around 20 years after we first introduced it. And when you see the contrast between our forks and our competitors you can also quickly see why most of their warranties have long since been quietly canceled or modified with complicated terms and conditions that usually limit the warranty to manufacturing defects alone.<br /><br />Feel free to contact us at stampy@odysseybmx.com with any questions you may have.<br /><br /><br /><br />---<br />http://www.odysseybmx.com<br />---<br />http://facebook.com/odysseybmx<br />http://twitter.com/odysseybmx<br />http://instagram.com/odysseybmx<br />http://odysseybmx.tumblr.com<br />http://youtube.com/odsyvision

ODYSSEY BMX | 2019 Stampy Fork Test

26th August, 2019

20 YEARS OF 41-THERMAL:http://odysseybmx.com/41thermalAs part of our mission to make the best BMX forks possible, we continue to refine the 41-Thermal® process at all stages of manufacturing. Each step in the process is held under strict scrutiny, and we continue to examine the strength and fatigue testing methods used to ...