YT Channel Video Videos For 9th of December, 2014

He'd been eying this rail by his house for weeks. He gave his artist friend plans for the ramp. It looked impossible and then he did it. It was truly a magical Gonz moment in the city he loves. <br /><br />Filmed in NY by Grant Yansura<br /><br />http://fourstarclothing.com/

Mark Gonzales for Fourstar

9th December, 2014

He'd been eying this rail by his house for weeks. He gave his artist friend plans for the ramp. It looked impossible and then he did it. It was truly a magical Gonz moment in the city he loves. Filmed in NY by Grant Yansurahttp://fourstarclothing.com/ ...

Dogtown's finest Blake Johnson gets Five Tricks at SPoT's Tampa Am & gives you the lowdown on Venice Boardwalk Performers, Insta babes, and why he rides Independent Trucks. Ride the Best!<br /><br />Follow Blake on Instagram!<br /> @blakeular<br /><br />MUSIC:<br />Splashh<br />"Vacation"<br />KanineRecords.com

Blake Johnson: 5 & 5 for Independent Trucks

9th December, 2014

Dogtown's finest Blake Johnson gets Five Tricks at SPoT's Tampa Am & gives you the lowdown on Venice Boardwalk Performers, Insta babes, and why he rides Independent Trucks. Ride the Best!Follow Blake on Instagram! @blakeularMUSIC:Splashh"Vacation"KanineRecords.com ...

http://wkndbrand.com/<br /><br />Proud to have Andy and Trev riding for WKND!<br /><br />Additional filming:<br />Jonathan Flechas and Chris James

Andrew Considine & Trevor Thompson Welcome To WKND

9th December, 2014

to have Andy and Trev riding for WKND!Additional filming:Jonathan Flechas and Chris James ...

HUF Quality Footwear is proud to introduce Craig Anderson to the team. <br /><br />Video by Kai Neville. <br />Additional filming by Jack Taylor, Blake Myers & Chris Bryan.<br /><br />http://www.hufworldwide.com/<br />http://store.hufworldwide.com/

HUF Quality Footwear Introduces Craig Anderson

9th December, 2014

HUF Quality Footwear is proud to introduce Craig Anderson to the team. Video by Kai Neville. Additional filming by Jack Taylor, Blake Myers & Chris Bryan.http://www.hufworldwide.com/http://store.hufworldwide.com/ ...

HiDefJoe and all of us at The Boardr watched Tampa Am in our hometown this weekend. It was nice to watch without having any work to do. Joe did point his lens a bit, though. Check out some of the ripping skateboarding that went down. Check out some photos from the whole weekend here: http://theboardr.com/post/BINGO_Game_of_SKATE_Dekline_Premiere

Nike SB Demo with Grant Taylor, Justin Brock, Ishod Wair in Tampa for Tampa Am

9th December, 2014

HiDefJoe and all of us at The Boardr watched Tampa Am in our hometown this weekend. It was nice to watch without having any work to do. Joe did point his lens a bit, though. Check out some of the ripping skateboarding that went down. Check out some photos from ...

Flying in the Waves | SURF Session | Les Landes, France

9th December, 2014

Talented surfers show us how they enjoy their time in the perfect waves of Landes! Subscribe Here for daily XTreme surfing videos: above surfers in Landes, 40 -FR.A journey in automn swell... their own wave garden ;-)Riders:Dorian LiberkowskiBen Rouff Julien & moreAll shots by: DroneShooting, Editing & Post-Prod by: ...

www.SupraSkateboarding.com<br /><br />This week we have Spencer and Romar with a few beautiful tricks at this beautiful spot in Madrid, Spain.<br /><br />Two For Tuesday is our new weekly feature dropping every Tuesday on SupraSkateboarding.com and Instagram. It will consist of one trick two angles, one angle regular speed and a slo-mo, or just two tricks.<br /><br />@SupraSkateboarding<br /><br />Video:<br />Alan Hannon<br />@alan916

SUPRA Two For Tuesday: Spencer Hamilton and Kevin Romar in Madrid

9th December, 2014

www.SupraSkateboarding.comThis week we have Spencer and Romar with a few beautiful tricks at this beautiful spot in Madrid, Spain.Two For Tuesday is our new weekly feature dropping every Tuesday on SupraSkateboarding.com and Instagram. It will consist of one trick two angles, one angle regular speed and a slo-mo, or just ...

As part of our mission to make the best BMX forks possible, we continue to refine the 41-Thermal® process at all stages of manufacturing. Each step in the process is held under strict scrutiny, and we continue to examine the strength and fatigue testing methods used to evaluate our designs.<br /><br />In the previous round of Stampy fork tests we blew the industry standard EN tests for bicycle forks out of the water, and yet we still couldn’t break our own fork. In fact, we had to give up after running the fork for 2,000,000 cycles and with the machine operating at its ultimate limit.<br /><br />So, in order to push the tests and our forks even harder we created an updated rig design that would let us supply much more force than the last time around. With this test we doubled up the cylinders that are applying the load and ramped the force up by 25%, going from 4000 Newtons to 5000 Newtons. That’s just over half a ton! (1124 lbf per cycle). Even so, at half a million cycles we started to wonder how long our forks were going to last, and since our competitor’s forks had already been taken to failure, we decided to ramp up the load on our forks to 6000 Newtons (1349 lbf), 50% higher than the previous tests, and after over 650,000 cycles, we were finally able to break them.<br /><br />It is important to note that the 41-Thermal forks not only outperformed every other model that we tested by a huge margin, but that they did so while being lighter than most of the other forks too. This is direct evidence that proper design, engineering and manufacturing are much more important factors than simply always making the part heavier in hopes of making it stronger.<br /><br />When you see how hard we push to make the best forks; to make them better and better every chance we get, it is easy to understand why our legendary lifetime warranty against bending and breaking is still around 15 years after we first introduced it. And when you see the contrast between our forks and our competitors you can also quickly see why most of their warranties have long since been quietly canceled or modified with complicated terms and conditions that usually limit the warranty to manufacturing defects alone.<br /><br />Feel free to contact us at STAMPY@ODYSSEYBMX.COM with any questions you may have.<br /><br />41-THERMAL ODYSSEY R-SERIES (R32/R25/F25) AND SUNDAY OCTAVE FORKS ARE AVAILABLE NOW:<br />• R32 offset (traditional) or R25 offset (steep)<br />• Freestyle (F25) version with R25 offset and U-brake bosses<br />• Laboratory tested and team proven.<br />• Custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.<br />• Steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.<br />• Optimized, 4mm dropout shape for grind and peg clearance.<br />• 7075-T6 pre-load bolt<br />• Proven 41-Thermal® processed 4130 chromoly<br />• Legendary lifetime replacement warranty<br />• 3/8” axle slots only<br />• Starting at 1lb 15.2oz (885 grams)<br /><br /><br /><br /><br /><br />---<br />http://odysseybmx.com<br />htttp://store.odysseybmx.com<br />---<br />http://odsyvision.com<br />http://facebook.com/odsybmx<br />http://twitter.com/odysseybmx<br />http://instagram.com/odysseybmx<br />http://vimeo.com/odysseybmx<br />http://flickr.com/photos/odysseybmx<br />http://odysseybmx.tumblr.com

BMX - Odyssey's R-Series Forks

9th December, 2014

As part of our mission to make the best BMX forks possible, we continue to refine the 41-Thermal® process at all stages of manufacturing. Each step in the process is held under strict scrutiny, and we continue to examine the strength and fatigue testing methods used to evaluate our designs.In ...

Over the past 10 years the Blackstix have become a staple in the Futures line, proving to be the best option when a lively, speed generating fin is preferred. While intentionally keeping the Ride Number of the Blackstix series in the 10 to 7 range, we've made some critical upgrades to bring you a new & improved ride.<br /><br />New to the Blackstix 3.0 is the addition of two layers of unidirectional carbon, aligned at a 23º angle from the base. The angle of the ‘Uni’ controls the ratio of tip bend vs rotation as it loads up through turns. Running from base to tip, the ‘Uni’ adds support to hold more power without feeling stiff.<br />23 Degree Unidirectional Carbon<br /><br />Working in conjunction with the ‘Uni’ are asymmetrical 12k carbon panels running vertically up the inside and outside of the fin. The inside panel runs completely through to the tip, along the leading edge. The outside panel only runs 2/3 of the way up the fin. This stepped reduction of carbon in the fin allows for more flex progression, creating a strong base and a snappy tip, resulting in a lively feel unique to the Blackstix.<br /><br />To add one more layer of performance to the Blackstix, we use epoxy resin. Epoxy resin is lighter, tougher & more resilient than polyester resin. These features all play a role in making the Blackstix the lightest & fastest fins in the world. As a bonus, epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in our environment.<br /><br />Futures V2 foil was a revolutionary introduction to the removable fin story originally, and it’s still the go to for Speed Generating fins. The foil enhances efficient water flow with its uniquely designed curved surfaces. The result is lift through all stages of the turn and buttery fluid rail-to-rail linkage, setting you up for peak performance even if the conditions are lacking push.<br /><br />Find out more at blackstix.com

Futures | Blackstix

9th December, 2014

Over the past 10 years the Blackstix have become a staple in the Futures line, proving to be the best option when a lively, speed generating fin is preferred. While intentionally keeping the Ride Number of the Blackstix series in the 10 to 7 range, we've made some critical upgrades ...